Industry · 02
Rolling Mill.Drives and control for rolling mills and steel plants.
Thyristorised DC drives, tension controllers and speed synchronisation for hot and cold rolling mills.
Problems we solve
Where rolling mill plants lose time and money.
01
Stand drives tripping and stopping the mill
Fault-finding and repair of thyristor DC and AC drives, with digital retrofits for obsolete analogue drives.
02
Cobbles and size variation between stands
PLC-based cascade speed control and loop control tuned with real bars in the stands.
03
Low yield from shears
Bar tracking and cut-to-length logic for crop, cobble and dividing shears.
04
High furnace fuel cost
Flue-gas oxygen measurement and air-trim control on the reheating furnace.
Watch
Rolling mill: breakdown to running.
How a drive breakdown is handled: WhatsApp the fault code, engineers on site, repair or retrofit, back in production.
Rolling mill: breakdown to running
How a drive breakdown is handled: WhatsApp the fault code, engineers on site, repair or retrofit, back in production.
What we do here
Our scope in rolling mill plants.
- 01Thyristorised DC drives
- 02Tension controller drives
- 03Speed synchronisation
- 04MCC & drive panels
Clients in this industry
Logos are trademarks of their respective owners.
Related services
Work on site
From rolling mill sites.
Real footage and photos from Kamakshi jobs. Clients are not named.
Bar rolling mill in production
Drives & automation on site · Gujarat
Reheating furnace discharge
Rolling mill site · Gujarat
Guides
Read before you call.
Industrial Automation · 5 min
Rolling Mill Automation for TMT Bar Plants — Drives, Loopers and Flying Shears
Drives & Motors · 6 min
Thyristor DC Drive Repair and Troubleshooting for Rolling Mills
Energy Saving · 5 min
Oxygen Analysers for Reheating Furnaces — Cutting Fuel Use With Combustion Control
Industrial Automation · 5 min
ERW Tube Mill Electrical and Automation Guide
- Can you repair old analogue DC drives?
- Yes, at board and power-stage level where parts are available. Where spares are no longer obtainable we plan a digital DC drive retrofit that keeps the existing motor.
- Do you work on tube and pipe mills too?
- Yes — drives, PLC control, accumulators and flying cut-off systems on ERW tube mills.
→Talk to an engineer
Have an industrialchallenge?Let's engineerthe solution.
Direct line
Mon–Sat · 09:00–19:00