Textile
Drive and PLC control for spinning, winding and processing lines.
PLC-based controlVFD speed controlEnergy saving
Industrial automation · Electrical systems · Control panels
Engineering thesystems behindmodern industry.
PLC and SCADA programming, VFD and drive commissioning, and custom-built control panels — designed and supported from Ahmedabad for plants across India and around the world.
- Experience
- 20+ years engineering
- Reach
- Ahmedabad → India → Worldwide
- Platforms
- PLC · SCADA · VFD · Panels
- Status
- Engineers available Mon–Sat
01 — Proof
Kamakshi in numbers
20+
Years of engineering
Two decades of hands-on work inside running plants.
10
Engineering services
From PLC logic to drive repair and operator training.
20
Clients
Steel, textile, chemical, paper and packaging plants.
3
Countries
India · Angola · Ghana.
Brands we install, program & service
Brand names are trademarks of their respective owners and are listed only to show the equipment we work with.
- Siemens
- ABB
- Schneider Electric
- Allen-Bradley
- Mitsubishi Electric
- Delta
- Omron
- Danfoss
- Yaskawa
- Fuji Electric
- Lauritz Knudsen (L&T)
- Havells
- Legrand
- Eaton
- Polycab
- KEI
- Finolex
- Lapp
- Crompton
- Kirloskar
- Bharat Bijlee
- WEG
- Honeywell
- Yokogawa
- Endress+Hauser
- Selec
- Multispan
- Masibus
- Phoenix Contact
- Weidmüller
- WAGO
- Rittal
02 — Capabilities
02What we engineer
Four disciplines. One team from drawing to commissioning.
Programming, drives, panels and site services under one engineering team — so the logic, the hardware and the handover all match.
PLC, SCADA and HMI systems programmed and integrated to run your process, not just your machines.
PLCSCADAHMIProcess Automation
VFD commissioning and AC/DC drive repair that keeps motors efficient and lines running.
AC VFDDC DrivesTension ControlDrive Repair
PCC, MCC, IMCC, APFC, AMF and PLC panels designed, fabricated, wired and tested in-house.
PCCMCCIMCCAPFCAMFHT / LT
Installation, energy audits, furnace oxygen analysis and operator training, delivered on site.
InstallationCommissioningEnergy AuditTraining
Start here
What's happening in your plant?
Pick the closest problem — we'll point you to the right service and a guide to read first.
Recommended
AC & DC Drive Repair
Most VFD and DC drive trips come from the load, the motor or the supply — not the drive itself. We find which, and repair or re-tune.
↳Inside a Kamakshi panel
Every layer,engineered.
Scroll to take a control panel apart — the way we design, wire and test every one before it leaves the workshop.
01 Enclosure
02 Mounting plate
03 Power section
04 PLC & I/O
05 Terminals
06 Door & HMI
03Engineering approach
We don't sell boxes.We commission systems.
Five steps, one accountable team.
The same engineers follow your job from the first site visit to the day your operators take over.
01
Site study
We walk the line, read the drawings and log what the machine actually does.
02
Design
Control philosophy, panel layout and I/O lists agreed before anything is built.
03
Build & wire
Panels fabricated and wired in-house with traceable, labelled terminations.
04
Test & commission
Loop checks, logic testing and live commissioning on your plant.
05
Train & support
Operators trained, documents handed over, support after go-live.
04Industries we serve
Built forplants thatcan't stop.
Five industries where we know the machines, the process and the cost of a stopped line.
Rolling Mill
DC drives, tension control and panels for hot and cold rolling.
Thyristorised DC drivesTension controller drivesSpeed synchronisation
Paper
Sectional drives and tension control for continuous paper machines.
Drive system integrationSCADA implementationEnergy management
Pharma
Process control and panels built to your GMP documentation requirements.
Temperature controlClean-room panelsBatch automation
Chemical
Instrumentation and control panels specified for hazardous-area duty.
Hazardous-area panelsProcess instrumentsLevel & pressure monitoring
Clients
Plants that run on our work.
Steel, textile, chemical, paper and packaging manufacturers — served from Ahmedabad, worldwide.
- GMP MachPro
- Crisper Technical Solution, Ahmedabad, Gujarat
- Jindal Texofab, Textile, Ahmedabad, Gujarat
- Rohan Dyes & Intermediates Ltd., Dyes & chemicals, Gujarat
- Zeepack, Packaging, Angola
- Tectools Engineering Company
- Parmeshvar Steel (GOD TMT), Steel (TMT), Ahmedabad, Gujarat
- Vivan Steel, Steel
- B5 Plus, Iron & steel, Tema, Ghana
- Industrias Topack Lda, Plastic packaging, Angola
- Active Engineers, Ahmedabad, Gujarat
- Vinny Overseas Ltd., Textile, Ahmedabad, Gujarat
- Vasuki Global Industries Ltd., Coal & energy, Rajkot, Gujarat
- Amit Paper Consultants & Engineers, Paper mill engineering, Ahmedabad, Gujarat
- R.G. Rolling India Ltd., Rolling & tube mill machinery, Ghaziabad, Uttar Pradesh
- Shriji Power & Automation Pvt. Ltd., Automation & enclosures, Greater Noida, Uttar Pradesh
- Shrijee Paper Mills Pvt. Ltd., Paper mill, Punadra, Gujarat
- Wahan Engineering Corporation, Cardan shafts, Sarkhej, Ahmedabad, Gujarat
- Gujarat Wire Nettings, Wire mesh & perforated sheets, Ahmedabad, Gujarat
- JCT Automation Pvt. Ltd., Automation & electrical panels, Vatva GIDC, Ahmedabad, Gujarat
One office · worldwide sites
- Clients
- 20
- Countries
- 3
Engineers travel from our only office in Ahmedabad to client sites in India · Africa · Asia · Europe · Americas.
Listed clients by country
- India17 clients
- Angola2 clients
- Ghana1 client
Client names and logos are trademarks of their respective owners and are shown to identify past and present clients.
Work on site
Panels we built. Plants we run.
Real photos and footage from Kamakshi jobs — panels built, tested and commissioned by our own team.
LT PCC with ACB incomers
Built, tested and commissioned · Gujarat
Bar rolling mill in production
Drives & automation on site · Gujarat
Pulp mill MCC panel
MCC line-up with ACB incomer
PCC & MCC panel line-up
Multi-section LT panels · Gujarat
Main LT PCC + APFC panel
Power distribution & power-factor correction
Reheating furnace discharge
Rolling mill site · Gujarat
Panels ready for dispatch
PCC & MCC panels packed after factory testing
ETP MCC panel
Effluent treatment plant motor control
Recycling plant panel
ACB incomer with metering
Electrical control panels
Three-section LT PCC · Gujarat
LT panel line-up
Incomer and feeder sections
Watch
See the work in under a minute.
Real site footage and photos from Kamakshi jobs; studio shots are marked as AI illustration inside each video.
Panels we build. Plants we run.
PCC, MCC and APFC panels designed, wired, tested and commissioned by Kamakshi's own team.
Rolling mill: breakdown to running
How a drive breakdown is handled: WhatsApp the fault code, engineers on site, repair or retrofit, back in production.
VFD tripping? 60-second check
Overcurrent, overvoltage, overload and earth faults: usual causes, first checks and typical codes.
From drawing to dispatch
Our five steps: site study, design, build and wire, test and commission, train and support.
05 — Company
05Company
Built on engineering.Driven by experience.
Kamakshi Electrical & Enterprise was founded by Kapildev Tiwari. Over two decades the work has grown from single machines to complete plant automation.
Today the team programs PLCs and SCADA, commissions and repairs drives, and builds control panels for plants across India and abroad — in Africa, Asia, Europe and the Americas.
Founded by
Kapildev Tiwari
Based in
Ahmedabad, Gujarat
Serving
India & worldwide
Experience
20+ years
06 — Why Kamakshi
06Why Kamakshi
What you get when an engineer owns the job.
No inflated numbers — just the way we work on every project.
Multi-platform PLC expertise
Siemens, Allen Bradley, Mitsubishi and Delta — programmed, modified and commissioned by our own engineers.
Design to commissioning
The team that designs the panel also wires it, tests it and switches it on at your plant.
Repair, not just replace
AC and DC drive repair keeps proven legacy machines running instead of forcing a full replacement.
Support after handover
Operator training, documentation and after-sales support are part of the job, not an extra.
Breakdown?
Send a photo of the panel or the drive's fault code — an engineer will look at it.
→Talk to an engineer
Have an industrialchallenge?Let's engineerthe solution.
Direct line
Mon–Sat · 09:00–19:00